Images in signatures now possible - Erollisi Marr

***Ogmuk*** · 03-19-2004, 01:06 PM

It's possible for the users listed as Supporter and can be accomplished the following way:

1) Reply to this post
2) Scroll to the bottom of the next page and click on "Manage Attachments"
3) Upload your image
4) Hover over the URL of the uploaded screenshot to see the attachment's ID, or right click on the full image for example the one I attached underneath: attachment.php?attachmentid=13.
5) Put the attachment ID number between ATTACH vb code in your signature (can be found in the User CP). In this case the number I'd have to put between the brackets is 13. An example can be found on the bottom of this page:
http://www.erollisimarr.com/forum/misc.php?do=bbcode
6) If you want to make the image 'clickable' then you should put the ATTACH code between URL code:
[ URL=http://www.yourwebsite.com ] [ ATTACH ]17[ /ATTACH ] [ /URL ]
Obviously you have to remove the spaces from this code.

We will apply the same rule as vbulletin.com does:
1 image up to 300 pixels wide, 125 pixels tall and 20k in size
(gif's are usually smaller, else reduce the quality of the jpg)

If you run into problems, post here or send me a PM.

***Ogmuk*** · 03-23-2004, 04:38 AM

.

Valleycrest · 03-25-2004, 02:53 PM

...

Martigan · 03-28-2004, 08:59 AM

Testing!

***Ogmuk*** · 03-28-2004, 09:47 AM

It's not showing. In which thread did you upload the file? You can upload it in this one so I can help out if it's not working.

FanonFaythunder · 03-28-2004, 10:36 AM

Testing...

FanonFaythunder · 03-28-2004, 10:47 AM

Something worth mentioning:

You can use the same syntax that would link an image to a URL w/ the attach code.

[*URL=website here][*attach]#[/attach][/URL]

Replace "website here" with your URL and "#" with your attachment number, and Remove both of the *'s from the code parts, and you have a linked image.

Martigan · 03-28-2004, 03:14 PM

Are you saying mine is not working? I see it just fine.

***Ogmuk*** · 03-28-2004, 04:37 PM

Nope, not working, attachment 16 is invalid it says. Where did you upload it to? Fanon's is working.

You can use the same syntax that would link an image to a URL w/ the attach code.

I forgot to mention that in my first post. I'll add it. Thanks.

Martigan · 03-28-2004, 11:10 PM

Attachment 26

***Ogmuk*** · 03-29-2004, 02:41 AM

Still not working. The only thing you have to put between the ATTACH code is "27", nothing more.

Martigan · 03-29-2004, 08:43 AM

Bah! First it said 16, then 26, now 27.

***Ogmuk*** · 03-29-2004, 11:16 AM

Each time you change the file it gets a new ID.

Mirwen Melo're · 04-09-2004, 08:33 PM

Ogmuk, will you allow supporters to have HTML in their signatures at some point?
Reason I ask is that I'd prefer to use a table to allow me to have all the lines of text in my signature beside my sig graphic. It saves vertical space in the thread.

***Ogmuk*** · 04-10-2004, 03:42 AM

Unfortunately HTML will never be enabled due to security reasons and since it's too easy to abuse (breaking tables, modifying backgrounds, etc). However, I can add custom vb code. Can you give an example of what you want to do and what would be the result of it?

Btw, currently the URL in your signature leads to http://www.circleofdreams.com.com/. Note the ".com.com"

Mirwen Melo're · 04-10-2004, 05:35 PM

Here's an example in the attached file. I can only do that in HTML using a table, unless you can make some kind of custom code. The table would be 2 cells. One with the CD logo, and the other holds the text. This way I save space in posts when my sig is used. In a couple of posts up, you can see the difference in the two.

Thanks for the heads up on the link too...

***Ogmuk*** · 04-12-2004, 01:39 PM

Thanks for the heads up, I'll check if I can create a customized vbcode which would allow this.

Lurkerr · 04-12-2004, 01:53 PM

Disable changing the bg colors of the tables if you allow em tho, plz.

***Ogmuk*** · 04-12-2004, 02:01 PM

I'm likely not going to allow tables but aligning the picture to either of the sides would accomplish the same result.

***Ogmuk*** · 04-12-2004, 03:41 PM

Ok, try this and remove the spaces I added:

[align=left ][attach ]28[/attach ][/align ]The rest of your signature text here

Mirwen Melo're · 04-12-2004, 04:28 PM

Ooo nice Ogmuk! It worked. I have to admit I had my doubts at first. I shall doubt you no more. /bows Thank you...

Lurkerr · 04-12-2004, 04:30 PM

What is that little period doing on the bottom left tho?

Mirwen Melo're · 04-12-2004, 04:47 PM

Not sure, but it's gone now.

I could barely see it with the light version of the board. You must be running the dark version.

Lurkerr · 04-12-2004, 05:14 PM

Originally Posted by Mirwen Melo're

Not sure, but it's gone now. I could barely see it with the light version of the board. You must be running the dark version.

Correct!

Deadscale · 04-12-2004, 05:59 PM

hahaha

I could have sworn Mirwen's avatar would blink, so I stared and stared at it, I got closer and closer, and it would never blink, so I figured I had just imagined it and then she blinked! I jumped back!

03-19-2004, 01:06 PM	#1
*Ogmuk* Administrator Join Date: Nov 2002 Posts: 1,335	Images in signatures now possible It's possible for the users listed as Supporter and can be accomplished the following way: 1) Reply to this post 2) Scroll to the bottom of the next page and click on "Manage Attachments" 3) Upload your image 4) Hover over the URL of the uploaded screenshot to see the attachment's ID, or right click on the full image for example the one I attached underneath: attachment.php?attachmentid=13. 5) Put the attachment ID number between ATTACH vb code in your signature (can be found in the User CP). In this case the number I'd have to put between the brackets is 13. An example can be found on the bottom of this page: http://www.erollisimarr.com/forum/misc.php?do=bbcode 6) If you want to make the image 'clickable' then you should put the ATTACH code between URL code: [ URL=http://www.yourwebsite.com ] [ ATTACH ]17[ /ATTACH ] [ /URL ] Obviously you have to remove the spaces from this code. We will apply the same rule as vbulletin.com does: 1 image up to 300 pixels wide, 125 pixels tall and 20k in size (gif's are usually smaller, else reduce the quality of the jpg) If you run into problems, post here or send me a PM. __________________ Ogmuk <Da`Kor> Last edited by Ogmuk; 03-28-2004 at 04:43 PM.

03-28-2004, 09:47 AM	#5
*Ogmuk* Administrator Join Date: Nov 2002 Posts: 1,335	It's not showing. In which thread did you upload the file? You can upload it in this one so I can help out if it's not working. __________________ Ogmuk <Da`Kor>

03-28-2004, 10:36 AM	#6
FanonFaythunder ThreadKiller, Bitches Join Date: Nov 2002 Posts: 3,874	testing Testing... __________________ Fanon Pinhead of Whit`s End No, I don't play... except when I do. Last edited by FanonFaythunder; 02-02-2005 at 01:53 PM.

03-28-2004, 10:47 AM	#7
FanonFaythunder ThreadKiller, Bitches Join Date: Nov 2002 Posts: 3,874	Something worth mentioning: You can use the same syntax that would link an image to a URL w/ the attach code. [URL=website here][attach]#[/attach][/URL] Replace "website here" with your URL and "#" with your attachment number, and Remove both of the 's from the code parts, and you have a linked image. __________________ Fanon Pinhead of Whit`s End No, I don't play... except when I do. Last edited by FanonFaythunder; 08-30-2004 at 09:45 AM.*

03-28-2004, 04:37 PM	#9
*Ogmuk* Administrator Join Date: Nov 2002 Posts: 1,335	Nope, not working, attachment 16 is invalid it says. Where did you upload it to? Fanon's is working. You can use the same syntax that would link an image to a URL w/ the attach code. I forgot to mention that in my first post. I'll add it. Thanks. __________________ Ogmuk <Da`Kor>

03-28-2004, 08:59 AM	#4
Martigan Supporter Join Date: Nov 2002 Location: San Juan Bautista, CA Posts: 4,467	Testing!

03-28-2004, 03:14 PM	#8
Martigan Supporter Join Date: Nov 2002 Location: San Juan Bautista, CA Posts: 4,467	Are you saying mine is not working? I see it just fine.

03-29-2004, 02:41 AM	#11
*Ogmuk* Administrator Join Date: Nov 2002 Posts: 1,335	Still not working. The only thing you have to put between the ATTACH code is "27", nothing more. __________________ Ogmuk <Da`Kor>

03-29-2004, 08:43 AM	#12
Martigan Supporter Join Date: Nov 2002 Location: San Juan Bautista, CA Posts: 4,467	Bah! First it said 16, then 26, now 27.

03-29-2004, 11:16 AM	#13
*Ogmuk* Administrator Join Date: Nov 2002 Posts: 1,335	Each time you change the file it gets a new ID. __________________ Ogmuk <Da`Kor>

04-10-2004, 03:42 AM	#15
*Ogmuk* Administrator Join Date: Nov 2002 Posts: 1,335	Unfortunately HTML will never be enabled due to security reasons and since it's too easy to abuse (breaking tables, modifying backgrounds, etc). However, I can add custom vb code. Can you give an example of what you want to do and what would be the result of it? Btw, currently the URL in your signature leads to http://www.circleofdreams.com.com/. Note the ".com.com" __________________ Ogmuk <Da`Kor> Last edited by Ogmuk; 04-10-2004 at 03:59 AM.

04-10-2004, 05:35 PM	#16
Mirwen Melo're Role-playing Moderator Join Date: Nov 2002 Posts: 129	Here's an example in the attached file. I can only do that in HTML using a table, unless you can make some kind of custom code. The table would be 2 cells. One with the CD logo, and the other holds the text. This way I save space in posts when my sig is used. In a couple of posts up, you can see the difference in the two. Thanks for the heads up on the link too... Last edited by Mirwen Melo're; 04-10-2004 at 05:42 PM.

04-12-2004, 01:39 PM	#17
*Ogmuk* Administrator Join Date: Nov 2002 Posts: 1,335	Thanks for the heads up, I'll check if I can create a customized vbcode which would allow this. __________________ Ogmuk <Da`Kor>

04-12-2004, 01:53 PM	#18
Lurkerr Mr. Helpful Join Date: Nov 2002 Posts: 1,720	Disable changing the bg colors of the tables if you allow em tho, plz. __________________ "I sold my soul to make a record, dip shit, and you bought one." -MJK

04-12-2004, 02:01 PM	#19
*Ogmuk* Administrator Join Date: Nov 2002 Posts: 1,335	I'm likely not going to allow tables but aligning the picture to either of the sides would accomplish the same result. __________________ Ogmuk <Da`Kor>

04-12-2004, 03:41 PM	#20
*Ogmuk* Administrator Join Date: Nov 2002 Posts: 1,335	Ok, try this and remove the spaces I added: [align=left ][attach ]28[/attach ][/align ]The rest of your signature text here __________________ Ogmuk <Da`Kor>

04-12-2004, 04:28 PM	#21
Mirwen Melo're Role-playing Moderator Join Date: Nov 2002 Posts: 129	Ooo nice Ogmuk! It worked. I have to admit I had my doubts at first. I shall doubt you no more. /bows Thank you... __________________ [ALIGN=left]Attachment 28[/ALIGN]Lady Mirwen Melo're Circle of Dreams Guild Leader ErollisiMarr.com Role-playing Moderator Administrator for Erollisi Marr Role-players Proud to be a regular at EverQuest Role-players. The best site for RPers in the game!

04-12-2004, 04:30 PM	#22
Lurkerr Mr. Helpful Join Date: Nov 2002 Posts: 1,720	What is that little period doing on the bottom left tho? __________________ "I sold my soul to make a record, dip shit, and you bought one." -MJK

04-12-2004, 04:47 PM	#23
Mirwen Melo're Role-playing Moderator Join Date: Nov 2002 Posts: 129	Not sure, but it's gone now. I could barely see it with the light version of the board. You must be running the dark version.

04-12-2004, 05:14 PM	#24
Lurkerr Mr. Helpful Join Date: Nov 2002 Posts: 1,720	Originally Posted by Mirwen Melo're Not sure, but it's gone now. I could barely see it with the light version of the board. You must be running the dark version. Correct! __________________ "I sold my soul to make a record, dip shit, and you bought one." -MJK

04-12-2004, 05:59 PM	#25
Deadscale Registered User Join Date: Mar 2003 Location: Texas Posts: 1,140	hahaha I could have sworn Mirwen's avatar would blink, so I stared and stared at it, I got closer and closer, and it would never blink, so I figured I had just imagined it and then she blinked! I jumped back! __________________ I would like to extend to you an invitation to the pants party.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode